Asus Z97M-PLUS Manual - Página 26

Navegue en línea o descargue pdf Manual para Placa base Asus Z97M-PLUS. Asus Z97M-PLUS 46 páginas.

1.2.7

Onboard buttons and switches

open-case system. This is ideal for overclockers and gamers who continually change settings

to enhance system performance.

MemOK! button

Installing DIMMs that are not compatible with the motherboard may cause system

boot failure, and the DRAM_LED near the MemOK! switch lights continuously. Press

and hold the MemOK! button until the DRAM_LED starts blinking to begin automatic

memory compatibility tuning for successful boot.

Z97M-PLUS

Z97M-PLUS MemOK! button

1-12

1.2.8 Onboard LEDs for the exact location of the DRAM_LED.

system and reinstall the DIMM before using the MemOK! function.

takes about 30 seconds for the system to test one set of failsafe settings. If the test

fails, the system reboots and test the next set of failsafe settings. The blinking speed

of the DRAM_LED increases, indicating different test processes.

timing set is tested. If the installed DIMMs still fail to boot after the whole tuning

process, the DRAM_LED lights continuously. Replace the DIMMs with ones

www.asus.com.

continues memory tuning after turning on the computer. To stop memory tuning, turn

off the computer and unplug the power cord for about 5–10 seconds.

to boot and load the BIOS default settings. A message will appear during POST

reminding you that the BIOS has been restored to its default settings.

ASUS website at www.asus.com after using the MemOK! function.

OS environment.

Chapter 1: Product introduction