Battery Doctor 20068 Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Cargador de batería Battery Doctor 20068. Battery Doctor 20068 4 páginas. 8 & 4 amp cec smart battery charger
Imprimir página7.1
Check the polarity of the battery posts. The POSITIVE (POS, P, +) battery post usually has a larger diameter then the NEGATIVE (NEG, N, -)
post.
7.2
Attach at least a 24-inch (61 cm) long 6-gauge (AWG) insulated battery cable to the NEGATIVE (NEG, N, -) battery post.
7.3
Connect the POSITIVE (RED) charger clip to the POSITIVE (POS, P, +) post of the battery.
7.4
Position yourself and the free end of the cable previously attached to the NEGATIVE (NEG, N, -) battery post as far away from the battery as
possible – then connect the NEGATIVE (BLACK) charger clip to the free end of the cable.
7.5
Do not face the battery when making the fi nal connection.
7.6
When disconnecting the charger, always unplug the unit from the wall fi rst. Disconnect the NEGATIVE (NEG, N, -) connection, then remove the
POSITIVE (POS, P, +) connection in this sequence.
BATTERY CHARGING - AC CONNECTIONS
8.
8.1
This battery charger is for use on a nominal 120-volt circuit. The plug must be plugged into an outlet that is in accordance with all local codes
and ordinances. The plug pins must fi t the receptacle (outlet).
8.2
Never alter the AC cord or plug provided – if it does not fit the outlet, have a proper outlet installed by a qualified electrician. An improper
connection can result in a risk of electric shock or electrocution.
NOTE: The use of an adapter plug is not recommended.
8.3
Recommended minimum AWG size for extension cord:
AC input rating, amperes*
At least
But less than
0
2
2
3
3
4
4
5
5
6
6
8
8
10
10
12
12
14
14
16
16
18
18
20
*If the input rating of a charger is given in watts rather than in amperes, the corresponding ampere rating is to be determined by dividing
the wattage rating by the voltage rating - for example: 1200 watts/120 volts = 10 amperes
Risk of electric shock or fi re.
AWG size of cord
Length of cord feet (m)
25 (7.6)
50 (15.2)
100 (30.5)
18
18
18
18
18
16
18
18
16
18
18
14
18
16
14
18
16
12
18
14
12
16
14
10
16
12
10
16
12
10
14
12
8
14
12
8
VOLTAGE OPTIONS:
12V/8A — Use this setting for charging 12 volt batteries
24V/4A — Use this setting for charging 24 volt batteries
•
12/24 Volt – 8 & 4 Amp Smart Battery Charger/Maintainer
•
Digital Display Shows Voltage, Amperage and Battery Charge Percentage
•
7 Stage Smart Battery Technology Prevents Overcharging
•
Reverse Hook-up Protection/Spark Resistant
•
Charges and Maintains Batteries from 5 to 400 Amp Hours
•
Includes Ring Terminals and Alligator Clip Cable Attachments
⑦
⑥
⑤
r
150 (45.6)
e
16
w
14
q
14
12
12
10
10
8
8
8
6
6
1.
Reverse Connection/Bad Battery LED
2.
Battery Charged LED
3.
Battery Charging LED
4.
Power LED
5.
Digital LED Meter
6.
Digital Meter Display (Voltage,
Amperage and Battery Percentage)
*The ring terminal cable attachment is equipped with a fuse. The fuse may blow if there is a surge in power or in the event of hooking the
battery up backwards. If the battery charger has no power or is not working, check the fuse fi rst. If the fuse is blown, replace it with the
same type (ATO/ATC style) and same value marked on the top of the fuse before returning the charger for replacement.
FEATURES
9.
⑧
⑨
⑩
7.
12 Volt/8 Amp Mode Indicator
8.
12 Volt/24 Volt Mode Select Switch
9.
24 Volt/4 Amp Mode Indicator
10. Digital Display Mode Switch
11. Alligator Clip Assembly
12. Ring Terminal Assembly with Fuse
13. Fused Protection*
⑪
⑫
⑬