Battery Power Solutions Freedom V2 Manual del usuario - Página 16

Navegue en línea o descargue pdf Manual del usuario para Accesorios para cámaras Battery Power Solutions Freedom V2. Battery Power Solutions Freedom V2 20 páginas. Cpap battery

Imprimir página

Power Backup Connection: Power Inverter

The Freedom

backup system for your PAP device in the event of a power outage.

When AC power is available it will bypass the lithium-ion cells of the

battery and power your device normally. If AC power is lost the battery

will recognize this and automatically start powering your PAP device.

Single Battery Connection

■ Plug the Freedom

then into the wall outlet.

■ Plug the Mobile Power Receptacle into the battery DC OUT port .

■ Plug the Power Inverter into the Mobile Power Receptacle.

■ Plug your PAP device power supply/cord into the Power Inverter.

Dual Battery Connection

To begin the dual battery setup battery A must be charged to at least

15%. Battery B can be at any charge level including 0%.

■ Plug the Freedom

A and then into the wall outlet. The charge level of this battery

must be� 15%.

■ Plug the Bridge Cable into the DC OUT port of battery A then into

the DC IN port of battery B.

■ Plug the Mobile Power Receptacle into the DC OUT port of battery B.

■ Plug the Power Inverter into the Mobile Power Receptacle.

■ Plug your PAP device power supply/cord into the Power Inverter.

Note: Depending on the PAP device being powered, it is normal for the digital

display screen of the batteries to read separate and different voltages. This is

due to the voltage output of the Bridge Cable.

CPAP Battery can be setup as an uninterrupted battery

power supply into the battery DC IN port and

power supply into the DC IN port of battery