Dot-Spot 25104 Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Iluminación paisajística Dot-Spot 25104. Dot-Spot 25104 12 páginas. Mini led garden spotlight 3w
Imprimir páginaTechnical data
Spotlight
Voltage
Power consumption
Luminous flux
Light colour
Beam angle
Connection cable
Protection class
Temperature range
Storage temperature
Overheat protection
LED
Housing
Power Supply
Input
Output
Power
Protection class
Safety
Intended Use
The dot-spot mini LED garden spotlight 3W is intended for the effect lighting of plants and objects
and for permanent installation. It is designed for operation in moderate climates. The luminaire is
intended for operation on safety extra-low voltage. The dot-spot mini LED garden spotlight sets are
ready to plug in and can therefore also be installed by any technically experienced person.
Safety instructions
The applicable safety regulations must be observed during assembly. The dot-spot mini
LED garden spotlight 3W is operated with a protective low voltage of 24 V DC. To avoid
dangers and defects, disconnect the power supply unit from the power supply before start-
ing any work on the spotlight or installation.
Do not open the housing of the lamp. Only connect the LED spotlight to power supplies whose out-
put voltage does not exceed 24 V DC. Check whether the mains voltage matches that of the power
supply unit. Incorrect voltages can destroy the LED spotlight and the power supply unit.
Follow the installation instructions for the power supply unit. Do not overload the power supply! The
total output of all loads connected to the power supply unit should be approx. 10% less than the
nominal output of the power supply unit.
24 V DC
3 W
200 lm
2700 K
40°
5 m with low voltage plug
IP 67
- 25 °C – +50 °C
- 40 °C – +80 °C
THERMOPROTECT system
not interchangeable, high-power branded LED, integrated driver
anodized aluminum and toughened safety glass 4 mm
230 V AC, 50 Hz
24 V DC
20 W
IP 65
47 mm
40 mm
52
mm
40 mm
60 mm
200 mm
9