Asus PA27A Series Manual del usuario - Página 30
Navegue en línea o descargue pdf Manual del usuario para Monitor Asus PA27A Series. Asus PA27A Series 35 páginas.
- 1. Canadian Department of Communications Statement
- 2. Safety Information
- 3. Care & Cleaning
- 4. Energy Efficiency
- 5. Welcome!
- 6. Package Contents
- 7. Monitor.introduction
- 8. Back View
- 9. Quickfit Function
- 10. Other Functions
- 11. Wall Mount
- 12. Adjusting the Monitor
- 13. Turning on the Monitor
- 14. Supported Operating Modes
- 15. Declaration of Conformity
- 16. Eu Declaration of Conformity
Regulation.approvals
*Specifications.are.subject.to.change.without.notice.
**measuring.a.screen.brightness.of.200.nits.without.audio/USB/Card.reader.connection.
***Requires.Mac.OS.10.10.x,.10.11.x,.10.12.x.
3.3
Troubleshooting (FAQ)
Problem
Power LED is not ON
The power LED lights amber and there is
no screen image
Screen image is too light or dark
Screen image bounces or a wave pattern is
present in the image
Screen image has color defects (white does
not look white)
No sound or sound is low
3-10
Energy Star**, UL/cUL, CB, CE, EuP, FCC, CCC, BSMI,
CU, VCCI, TCO 7.0, J-MOSS, RoHS, WEEE, PSE, KCC,
ICES-3, EAPEAT, ErP, CEL, ISO 9241-307, UkrSEPRO,
RCM, MEPS, PC Recycle, KC, e-Standby, TUV Flicker
Free, TUV Low Blue Light, Windows 7, 8.1 and 10 WHQL,
Mac Compliance***
Possible.Solution
• Press the
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
• Check if the power switch is ON.
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
• Adjust the Contrast and Brightness
settings via OSD.
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
• Ensure that the HDMI/DisplayPort cable is
properly connected to the monitor and the
computer.
• Adjust the volume settings of both your
monitor and HDMI/DisplayPort device.
• Ensure that the computer sound card
driver is properly installed and activated.
Chapter 3: OSD (On-Screen Display) menu
button to check if the monitor