Dahle DAHLE 450 Series Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para Recortadora Dahle DAHLE 450 Series. Dahle DAHLE 450 Series 7 páginas. Hopper feed shredder
También para Dahle DAHLE 450 Series: Manual de instrucciones (12 páginas)
Imprimir página
SHREDDING
Turn shredder on. Press Forward Button (4) to begin shredding operation.
The shredder can be fed either from the top or the front. For this purpose, a
feed opening is provided on the top for emptying waste paper baskets (paper
only) and at the front for feeding cut stock and continuous forms.
Three (3) EDP shelves can be folded up to facilitate the shredding of
continuous forms.
The shredder will not operate unless the Waste Door (9) and Access Door (13)
are completely closed.
Microfiche and transparencies can also be shredded in the same manner as
paper, however, you should shred a piece of paper after every 8 or 10 sheets
of plastic. This helps clean plastic particles out of the shredding mechanism.
CAPACITY
Capacity is the number of sheets of 8½" x 11" paper that can be shredded at
one time. These figures are approximate and machines may vary slightly due
to various conditions. It is not recommended that you try to run your shredder
at maximum capacity, as this increases the chance of a paper jam.
Model
20452
20453
20 Lb. Bond
85
65
16 Lb. Bond
100
85
1-800-658-8788 - www.abcoffice.com