Electralog CS4416 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Estufa Electralog CS4416. Electralog CS4416 13 páginas. Compact stoves
También para Electralog CS4416: Manual práctico del usuario (10 páginas)

Imprimir página

Operation

turn the thermostat control

clockwise all the way to turn

on the heater. When the room

reaches the desired temperature,

turn the thermostat knob counter

clockwise until you hear a click.

leave in this position to maintain

the room temperature at this

setting. For additional heat, turn

clockwise until you hear the click

again and the heater will turn on.

NOTE: When the heater

is switched on, the heater

fan will operate. The heater

element may or may not be on

depending on the thermostat

control setting (see "heater

Thermostat Control").

Resetting the Temperature

Cutoff Switch

Should the heater overheat, an

automatic cut out will turn the

heater off and it will not come

back on without being reset. It

can be reset by switching the

Main On/Off Switch to Off (" O ")

and waiting five (5) minutes

before switching the unit back on.

CAUTION: If you need to

continuously reset the heater,

unplug the unit and call

Customer Service at

1-888-346-7539.

Remote Operation

The Compact Stove is supplied

with an integrated On/Off remote

control.

NOTE: Ensure that the

stove's Main On/Off Switch

is set to the remote Control

setting (" " position).

To operate, push the ON button

to turn stove on, push the OFF

button to turn the stove off.

Battery Replacement

To replace the battery:

•

Slide battery cover open on

the hand held transmitter

(Figure 2).

•

Correctly install one (1) 12 Volt

(A23) battery in the battery

holder.

•

Close the battery cover.