Doug Fleenor Design NODE1-P Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación Doug Fleenor Design NODE1-P. Doug Fleenor Design NODE1-P 10 páginas. Single port node ethernet to dmx interface
Imprimir página
The Port A page allow setting of the attributes of the DMX512 port. Be sure to click the Save Settings
button before selecting another page.
Operation of the N
1
ODE
Upon Loss of DMX512 from the network, the N
1 will continue to transmit its last received
ODE
DMX512 data for three seconds. It then stops transmitting DMX512 and disables the the DMX512
line driver allowing moving lights and dimmers to reset or to let a Preset10 take control of the line.
Merging on the N
1 is done automatically. Six network sources per port are allowed on the N
1.
ODE
ODE
This means that a single port on the N
1 set for universe one can automatically merge six different
ODE
sources which are generating universe one. In Streaming ACN mode, priorities of the stream are
also taken into account. For example, the N
1 will automatically merge six sources with the same
ODE
priority. If a new source with a higher priority is received, the other sources will be rejected until the
higher priority source has timed out. If a port is set up to input DMX512 in Streaming ACN mode, that
port will be transmitted on the network with a priority of 100. This is the default priority for Streaming
ACN.
8 of 10