Doug Fleenor Design PRE10E-A Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación Doug Fleenor Design PRE10E-A. Doug Fleenor Design PRE10E-A 11 páginas.

PRODUCT OVERVIEW

The Preset Ten Ethernet (PRE10E-A) wall station plays back snapshots of sACN

(E1.31) on four universes. The simple front interface allows the user to control 2,048

individual slots with the push of a button. Static snapshots from any sACN capable

console record into the ten presets. Snapshot play back may be used as an alternative

to a more complex console, or operate along with that same console. Various lockout

topologies make the PRE10E-A ideal in venues requiring untrained users to control

fixtures typically accessed by a more complex console. The PRE10E-A supports Power

over Ethernet (PoE – 802.3af) or a 24-48VDC power input. Station configuration takes

place on a rear facing user interface. Multiple stations may operate on the same

universes, and stations operating on different universes may operate on the same Local

Area Network (LAN)

The PRE10E-A installs into a standard two gang electrical wall box. Minimum

dimensions on the inside of the electrical box are 3.6"h X 2.9w" x 1.4"d. Data input and

output takes place over the RJ45 jack. For best possible data rates, a cable capable of

Fast Ethernet (100BASE-TX) is required. The cable must connect the PRE10E-A to an

Ethernet LAN that contains the console and receiving devices.

Power may enter the unit using the Ethernet cable when a Power over Ethernet switch

or injector are used. When utilizing PoE only one cable is required. Installations not

utilizing PoE can use the Auxiliary 24-48VDC input.

Page 2 of 10