Doug Fleenor Design Preset 10 Architectural Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Unidad de control Doug Fleenor Design Preset 10 Architectural. Doug Fleenor Design Preset 10 Architectural 8 páginas.
Imprimir página
SPECIFICATIONS:
Connector:
Connector Pin Out:
Input/Output Circuit:
Indicators:
User Controls:
Option Jumpers:
Power Input:
Color:
Size:
Phoenix Contact MSTB series 5 position two part terminal block
Model: MTSB 2,5/5-ST-5,08 Order Number: 17 57 04 8
Supply voltage "hot"
(V)
(C)
Supply common (internally tied to DMX512 common)
(+)
DMX512 data +
DMX512 data –
(-)
(C)
DMX512 common
ESD protected EIA-485 transceiver (LT1785)
Ten green preset indicator LEDs
One yellow Fade Time LED
One red Signal / Record LED
Ten preset push buttons
One recessed Fade Time push button
One recessed Record push button
For a single station installation, all jumpers should be installed (see figure 1,
page 5).
INSTALLED
JP1
Recording Enabled
JP2
Main Station
JP3
Architectural Mode
JP4
Single Station Mode
9 to 15 volts AC or DC, 200mA per station
(A 10 volt class 2 "doorbell" transformer is recommended for fixed installations)
Black anodized with silver engraved nomenclature
Faceplate: 4.5"h X 2.75"w X 0.2"d
Faceplate rear insert: 4.05"h X 2.4"w X 0.1"d
Electrical box minimum inside dimensions: 3.5"h X 2.1"w X 1.25"d
Included back box: Raco 670RAC
Page 3 of 8
REMOVED
Recording Disabled
Remote Station
Portable Mode
Multi Station Mode