Com World CMD-RF1080P Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Media Converter Com World CMD-RF1080P. Com World CMD-RF1080P 19 páginas. Pal-secam to ntsc video converter with full hd 1080p
Imprimir página( 2 ) Using HDMI Input:
1.
Connect the HDMI cable from the "HDMI out" of the CMD-RF1080p box to
HDMI Input of your TV or monitor. Take another HDMI cable and connect it to
HDMI Input of your TV or monitor. Take another HDMI cable and connect it to
the HDMI output of your video device such as game console, DVD Player,
the HDMI output of your video device such as game console, DVD Player,
Satellite CMD-RF1080p box. And the other end to the "HDMI IN" of the
Satellite CMD-RF1080p box. And the other end to the "HDMI IN" of the
CMD-RF1080p box.
CMD-RF1080p box.
2.
2.
Connect the CMD-RF1080p to your TV using an HDMI cable.
Connect the CMD-RF1080p to your TV using an HDMI cable.
3.
3.
Set your TV to HDMI input mode. This is done by pressing a button on your
Set your TV to HDMI input mode. This is done by pressing a button on your
TV's remote that says something like "Input" or "Line in", or "Input Select", etc.
TV's remote that says something like "Input" or "Line in", or "Input Select", etc.
4.
4.
Push the "INPUT" key on the remote (See #3 on page 11) repeatedly until the
Push the "INPUT" key on the remote (See #3 on page 11) repeatedly until the
CMD-RF1080p is on "HDMI" input mode. If the picture is on the TV the
CMD-RF1080p is on "HDMI" input mode. If the picture is on the TV the
installation is OK. If not then check the connections again.
installation is OK. If not then check the connections again.
CATV or AIR
TV
the "HDMI out" of the CMD-RF1080p box to
REAR
HDMI Input
HDMI Output
DC
7
HDMI Output
AC/DC Adaptor
TM
PS3