Dahua HAC-HDBW2220EN Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad Dahua HAC-HDBW2220EN. Dahua HAC-HDBW2220EN 18 páginas. 1/2 megapixel 720p/1080p vandal-proof ir hdcvi dome cameras

Imprimir página

Step 4

Adjust the camera module angle to a proper position and then fix the screws to fasten.

Figure 3-2

Step 5

Use three enclosure fastening screws to secure the dome housing on the pedestal.

3.2 HAC-HDW2120SP/N and HAC-HDW2220SP/N

Step1

Please take the installation position map in the accessories bag, and then paste it on the ceiling or the wall

according to your monitor area requirements. Draw and then dig three holes in the installation surface and

then insert three expansion bolts in the holes. Secure these three bolts firmly.

Step 2

Turn counter clockwise to remove the decoration ring. Please dig a "cable exit hole" in the surface

according to the installation position map if you want to draw out the cable from the top of the installation

surface. You need to draw out the cable from the cable channel side port of the pedestal if you want to

draw out the cable from the side port of the cable channel. Adjust the device installation pedestal to the

proper position and then draw the cable through the cable exit. Line up the three screw holes in the device

pedestal to the three plastic expansion bolt holes in the installation position. Put the three self-tapping

screws in the three plastic expansion bolts firmly. Now the dome camera is secure in the installation

surface. See Figure 3-3.