Asus ExpertWiFi EBR63 Manual de configuración rápida
Navegue en línea o descargue pdf Manual de configuración rápida para Enrutador de red Asus ExpertWiFi EBR63. Asus ExpertWiFi EBR63 2 páginas. Wireless-ax3000 dual-band router
También para Asus ExpertWiFi EBR63: Manual de configuración rápida (2 páginas)
Imprimir página
Wireless-AX3000 Dual-band Router
Enrutador de doble banda inalámbrico AX3000
ExpertWiFi EBR63
Descripción general del enrutador
1
2
3
4
5
1
5GHz LED / 5 GHz LED
8
2
2.4GHz LED / 2,4 GHz LED
9
3
LAN 1-4 LEDs / LED de LAN 1-4
10
WAN (Internet) LED /
11
4
LED de WAN (Internet)
5
Power LED / LED de encendido
12
6
WPS button / Botón WPS
13
7
Reset button / Botón de reinicio
10
11
12
13
6
7
8
9
Power button / Botón de Energía
* For detailed
Power (DCIN) port /
information, please
refer to
Puerto de alimentación (DCIN)
https://asus.click/
ExpertWiFiEBR63
USB 2.0 port / Puerto USB 2.0
USB 3.2 Gen 1x1 port /
Puerto USB 3.2 Gen 1x1
WAN (Internet) port /
Puerto WAN (Internet)
LAN 1-4 ports / Puertos LAN 1~4
SA21801 / Primera edición / Julio 2023
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our
environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other
components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed
recycling information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework,
we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC RF Caution Statement:
WARNING : Any changes or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as
documented in this manual. This device is restricted for indoor use.
WARNING! This equipment must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all
persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems.
CAN ICES-003(B)/NMB-003(B)