Advance Tube Technology OP128 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de grabación Advance Tube Technology OP128. Advance Tube Technology OP128 8 páginas. 28 midi locations through 12 push-buttons

Imprimir página

MODE / MIDI SETUP

MIDI SETUP

MIDI CH

MODE

1 2 3 4 5

0/127

ch 1

ch 2

ch 3

ch 4

ch 5

ch 6

ch 7

ch 8

OP 128

MIDI CONTROLLER

SERIAL N°

Advance

TUBE TECHNOLOGY

I M P O R T A N T !!!

In order to activate the mode and/or MIDI

channel, it is always advisable to turn off

and turn on the unit. Otherwise, also

modifying the position of the microswitches,

the condition would remain unchanged.

1 2 3 4 5

1/128

ch 9

ch 10

ch 11

ch 12

ch 13

ch 14

ch 15

ch 16

On the right side of the chassis

There is a window with 5

microswitches for mode and

MIDI channel setup.

1,2,3,4 switches regard MIDI

channel setup while

Microswitch/5 regard 1/128 -

0/127 mode.

MIDI channel setup

Please refer to the table printed on the

bottom side of the chassis.

After chennel selection, set the

microswitches 1,2,3,4, on the

correspondent position. Disconnect the

unit from the power supply and then

turn on the unit again. After auto-check

control, OP128 will fix the current setup

in its memory.

Mode setup

Refer again to the above mentioned

table. Select one of the two modes, set

the microswitch/5 on the correspondent

position.

Disconnect the unit from the power

supply and then turn on the unit again.

After auto-check control, OP128 will fix

the current setup in its memory.

0/127 mode: pushing the numbers 8,9

on bank 12_ (128, 129), 127 mode will

be visualized and activated.

1/128 mode: pushing the number 0 on

bank _0, 01 mode will be visualized and

activated; pushing the number 9 on

bank 12_ (129), 128 mode will be

visualized and activated.