Baumer HMG 10 PROFINET Manual de instrucciones de instalación y funcionamiento - Página 4
Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Media Converter Baumer HMG 10 PROFINET. Baumer HMG 10 PROFINET 32 páginas. Absolute encoder with magnetic sensing
Imprimir página
IMPORTANT NOTES
1.
IMPORTANT NOTES
1.1
Symbol guide
Warning
Disregarding could result in serious injury, death or damage to property
)
Attention
Disregarding could result in damage to property or damage/malfunction of the en-
coder
i
Information
Additional information and recommendations
1.2
Intended use
The encoder is a precision measurement device for the acquisition of speed/position in-
formation for the control of drive units and the provision of electronic output signals for
downstream devices�
The encoder must not be used for any other purpose� The function of the encoder is de-
scribed in this mouting instruction� The customer must check the suitability for the purpose
intended�
Mounting and selection must be executed by authorized and qualified personnel. Moun-
ting, electrical commissioning or any other work with the encoder or system is to be perfor-
med by appropriately qualified staff only.
Do not put encoder into service if there is any visible evidence of damage�
Do not operate encoder beyond the limit values stated in this mounting instruction�
Any risk of personal injury, damage of the system or company equipment due to failure or
malfunction of the encoder must be eliminated by corresponding safety measures�
Warning
Disregarding intended use could result in serious injury or damage to property�
1.3
Exclusion from liability
The manufacturer is not liable for any damage to persons or property resulting from unin-
tended use of the encoder�
1/29
MB248EN - 11171699, 17A2, Baumer_HMG10-PROFINET_II_EN