Douglas Dynamics SnowEx HDV 77770 Manual de instrucciones de instalación - Página 5
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Accesorios para automóviles Douglas Dynamics SnowEx HDV 77770. Douglas Dynamics SnowEx HDV 77770 16 páginas. Snowplow
Imprimir páginaUNPACKING AND REMOVING SHIPPING
BRACKETS
1. Set aside the blade guides and parts bags. The
vehicle electrical harnesses and Owner's Manual
packet are in the bag with the headlamp box.
Move the attach/detach lever to unpin the
receivers and set aside.
NOTE: Leave handle in the detach position during
entire assembly process.
2. Remove the lag screws and wood blocks securing
the headlamp channel to the headgear and set the
headlamp channel aside.
3. Remove the packaging hardware securing the
headgear to the T‑frame, except for the clevis pins
and the shipping brackets.
4. Remove the fasteners and blocking securing the
T‑frame to the pallet.
5. While supporting the headgear, remove and retain
the clevis pins and discard the shipping brackets
and hairpin cotters.
Remove and retain
clevis pins (both sides).
Lit. No. 52592, Rev. 04
INSTALLATION INSTRUCTIONS
Remove and discard
shipping brackets
(both sides).
Remove and discard the shipping brackets and
the two cap screws and locknuts from the lift
cylinder.
5
Remove and discard
shipping brackets
(both sides).
July 15, 2020