Douglas Dynamics SweepEx ValuSweep Broom VSB-060 Manual del usuario e instrucciones de instalación - Página 9

Navegue en línea o descargue pdf Manual del usuario e instrucciones de instalación para Soplador Douglas Dynamics SweepEx ValuSweep Broom VSB-060. Douglas Dynamics SweepEx ValuSweep Broom VSB-060 14 páginas. 60" dust mop kit, broom
También para Douglas Dynamics SweepEx ValuSweep Broom VSB-060: Manual (4 páginas)

Imprimir página

ATTACH BROOM TO FORKLIFT

With the SweepEx

broom sitting on the ground, and

the mount facing the lift truck, drive straight and level

into the fork pockets until the tips of the forks are

completely dead-ended into the box end of the broom

mount.

ValuSweep

Broom

NOTE: For ValuSweep brooms only – Make sure

that the threaded lock-down knob is threaded all

clear of the lift truck fork.

Drive the forklift forward all the way until the end of the

fork tip rests at the back of the fork pocket.

Gently drop the forks down until the forks rest on the

bottom of the pocket. Once the fork tips are fully into

the pocket, lower the threaded lock-knob assembly

all the way down by turning the knob clockwise in a

tightening manner.

tighten to ensure that the broom will not slip off

the forks while back drag sweeping. (DO NOT

OVERTIGHTEN THE KNOB ASSEMBLY FOR

Do not use an external tool to overtighten the

lock-down knob. The ValuSweep attachment is now

complete and sweeping can begin.

Pro-Broom and Mega-Broom

With the fork tips level and fully engaged into the

fork pockets of the Pro-Broom or fork mount on the

Mega-Broom, the following directions apply:

1. Slightly raise the lift truck forks and tilt back to lift

the bristles off the ground 2". This will keep the

forks in the top of the pocket, and the tips of the

forks dead-ended fully into the end stop angle on

the mount.

2. Now that the weight of the broom is completely

suspended on the fork, attach the chain to the fork

carriage on one end and to the broom on the other

end using the clevis hooks. The chain should be

tightened by hand.

3. Repeat the process on the other side.

Lit. No. 48166, Rev. 00

OPERATION

APPLICATIONS

ValuSweep Broom

The ValuSweep broom has 5 rows of bristles

and works well sweeping inside loading docks,

and small parking lots. Typical applications are:

material spills, shrink wrap debris, broken pallet

scraps, Floor-Dry, standing water, light snow from

overhead doorways, and loading docks.

Pro-Broom

The Pro-Broom broom has 8 rows of bristles and

works well sweeping loading docks, lumber yards,

large parking lots, roadways, warehouse recycling

plants, rubbish/material yards, and trucking terminals.

Typical applications are material spills, broken pallet

scrap, mud, dirt, scrap-metal debris, standing water,

light snow and food debris.

Mega-Broom

The Mega-Broom broom has 11 rows of bristles and

works well sweeping lumber yards, construction

sites, nursery yards, job sites, roadways, parking lots,

recycling, and industrial plants. Typical applications

are: material spills, broken-pallet scraps, mud, sludge,

water, scrap metal, light snow, glass, construction

debris, bricks, tires, steel shavings, banding and small

boulders.

October 15, 2014