Dahua E Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para DVR Dahua E. Dahua E 18 páginas. Hdcvi eyeball camera
También para Dahua E: Manual del usuario (19 páginas)

Imprimir página
Figure 3-5
Step 1
Rotate the enclosure to align the arrow on the enclosure edge with the arrow on the pedestal
edge; press inward according to the arrow location of the enclosure and meanwhile push
outward according to the arrow location of the pedestal to separate the concave; pull the
enclosure to make it break away from the pedestal.
Step 2
Confirm the installation location and dig holes on the installation surface.
Step 3
Use tools to insert expansion bolts into the installation holes and fix them firmly.
Step 4
Adjust pedestal location (if it is side cable outlet, then pull the cable through the side outlet
cable slot). Align the bolt fixing holes of the device pedestal with the expansion bolt fixing holes
of the installation surface; insert the self-tapping screws into the expansion bolts and fasten
them firmly to fix the pedestal on the installation surface (if it is top outlet, pull the cable
through the outlet hole on the installation surface after the pedestal is fixed firmly).
Step 5
Make the enclosure buckle get stuck into the pedestal, rotate the enclosure and dome body to
a proper monitoring location.
So far the device installation and cable connection are completed; you can check the image
via back-end coding device.

Model E

9