Baumer PAC50S Manual de instrucciones - Página 31
Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida Baumer PAC50S. Baumer PAC50S 44 páginas.
Imprimir página
Baumer
10.4.4
Submenu
Menu
Switch setup
Submenu
Switch 1
Switch 2
10.4.5
Submenu
Menu
Display setup
V1 | PAC50H/S
Switch setup
Switch 1
Settings for other ranges,
Use IOL or FlexProgram
Switch 2
Settings for other ranges,
Use IOL or FlexProgram
Switch setup
is for parameterization of the sensor's the switching behavior.
Switch 1:
n
Selection of functions and values for the sensor switching be-
havior at Switch 1:
▪ Switching source
▪ Switching function
▪ Switching logic
▪ Window setup of selected source (Conductivity/Concentra-
▪ Damping
Switch 2:
n
Selection of functions and values for the sensor switching be-
havior at Switch 2:
▪ Switching source
▪ Switching function
▪ Switching logic
▪ Window setup of selected source (Conductivity/Concentra-
▪ Damping
Display setup
Screen layout
Backlight
Orientation
Language
Password
Menu timeout
Cond., Conc., Temp.
Switch source
Switch function
PNP, NPN, Push-pull, OFF
Switching logic
Active high / Active low
Window 'Source'
conc. and temp.;
Damping
Switch source
Cond., Conc., Temp.
Switch function
PNP, NPN, Push-pull, OFF,
Switching logic
Active high / Active low
Window 'Source'
conc. and temp.;
Damping
tion/Temperature)
tion/Temperature)
Value (large) + det / Value (large) / Value, Temp + Tag / Media label + Tag / Media label + det
Colour
None / White / Green / Red
Intensity
Normal / Rotated
English / Custom / Deutsch / Français
Password enable
New password
Value [sec]
Operating Manual
Description Display
Window min.
Value [mS/cm]
Window max.
Value [mS/cm]
Hysteresis
Value [mS/cm]
Value [sec]
4-20mA
Window min.
Value [mS/cm]
Window max.
Value [mS/cm]
Hysteresis
Value [mS/cm]
Value [sec]
10%-100%
Enable / Disable
Four digit code
|
10
31