Doulton EcoFast Instrucciones de instalación

Navegue en línea o descargue pdf Instrucciones de instalación para Sistemas de filtración de agua Doulton EcoFast. Doulton EcoFast 4 páginas.

Filter Installation Instructions

Figure 1

Filter

head

Neck

Filter cap

Filter body

Operating conditions

Maximum working pressure: 6 bar (90psi) - see note* on page 4

Maximum working temperature: 30°C (86°F)

Minimum working pressure: 1.4 bar (20psi)

Minimum working temperature: 5ºC (41ºF)

Maximum plastic housing life: 10 years - see note* on page 4

PLEASE NOTE: Allowing the unit to freeze will invalidate the product

warranty

Important

This filter is intended for installation under the sink away from direct sunlight

This filter is not designed for the treatment of hot water and should only be

connected to the cold water supply

It is important to wear rubber gloves or wash your hands thoroughly before

Filter element

and after servicing the filter

mount

Care must be taken at all times to prevent contamination of the neck of the

filter cap and stem of the filter element mount by contact with unfiltered

water or dirty hands after cleaning the filter element surface

Connecting Pipework and Fittings for either the 1/4" or 3/8" models:

The filter is supplied with pushfit connections. Medium density polyethylene tubing

from a reputable supplier is recommended. An isolation valve and non-return valve

should be fitted upstream of the filter (these are required by law in the UK).

The isolation valve may be used to regulate the maximum flow rate in

accordance with the requirement of the filter element used. Having selected the

appropriate fittings, a user valve/faucet should be installed in accordance with

the manufacturer's instructions in a convenient position and then connected

downstream of the filter.

www.doulton.com

A GENUINE

WATER FILTER

A GENUINE WATER FILTER