Asus DS300f Manual de inicio rápido - Página 14

Navegue en línea o descargue pdf Manual de inicio rápido para Servidor Asus DS300f. Asus DS300f 17 páginas. Quick start guide
También para Asus DS300f: Manual de inicio rápido (47 páginas)

Imprimir página

ASUS Storage DS300j Quick Start Guide

Task 7: Setting Up the CLI Connection

The ASUS Storage DS300j unit has a Command Line Interface (CLI) to manage

all of its functions via your PC's terminal emulation program, such as Microsoft

HyperTerminal. This procedure uses the serial cable connection you made on

page 11.

You must use the serial connection to run the CLI for direct management of the

ASUS Storage DS300j unit. See "Chapter 3: Management" in the ASUS Storage

DS300j User Manual.

To set up a serial connection:

Change your terminal emulation program settings to match the following

specifications:

•

Bits per second: 115200

•

Data bits: 8

•

Parity: None

•

Stop bits: 1

•

Flow control: none

Start your PC's terminal VT100 or ANSI emulation program.

Press Enter once to launch the CLI.

When connected and ready, the CLI screen displays:

***********************************************

cli>

The cli> prompt on your screen indicates that you have a connection and the

CLI is ready to accept commands.

CLI Command Set

The CLI uses the following set of commands:

cable – Specifies the length of cable for optimal signal quality.

enclosure – Displays full information on the VessJBOD enclosure and its

components.

factorydefault – Restores factory default settings.

help – Use alone to see the list of commands. Use with a command to see a list

of options. Examples: enclosure -help or enclosure -h.

link – Displays the current status of the PHYs (links), error counter, expander and

attached SAS addresses.

ASUS SAS Expander v2.00.0000.xx