Baumer EXG Manual del usuario - Página 26

Navegue en línea o descargue pdf Manual del usuario para Cámara digital Baumer EXG. Baumer EXG 42 páginas. Gigabit ethernet

Imprimir página

Figure 34 ►

Timestamps of recorded

images.

4.7 User Sets

Four user sets (0-3) are available for the Baumer cameras of the EXG series. User set 0

is the default set and contains the factory settings. User sets 1 to 3 are user-specific and

can contain the following information:

Parameter

Binning

Brightness Correction

Defect Pixel Correction

Defectpixellist

Flash Settings

Gain

Flash Settings

These user sets are stored within the camera and and cannot be saved outside the de-

vice.

By employing a so-called "user set default selector", one of the four possible user sets

can be selected as default, which means, the camera starts up with these adjusted pa-

rameters.

4.8 Factory Settings

The factory settings are stored in "user set 0" which is the default user set. This is the only

user set, that is not editable.

4.9 Timestamp

The timestamp is part of the GigE Vision

Ticks

. Any image or event includes its corresponding timestamp.

At power on or reset, the timestamp starts running from zero.

*) Tick is the internal time unit of the camera, it lasts 32 nsec.

Parameter

Image Format

Look-Up-Table

Message Channel

Offset (Black Level)

Partial Scan

Pixel Format

Trigger Settings

standard. It is 64 bits long and denoted in

1123354

1123254

1123154

1123054

1122754

1122654

1122554

1122454

1122354