Baumer FLDK 110G1006/S14 Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Caja Baumer FLDK 110G1006/S14. Baumer FLDK 110G1006/S14 35 páginas. Laser copy counter

7.3

Beam blocker

Uncontrolled reflections of the laser beam can cause malfunctioning of the sensor or disturb people.

Therefore, a beam blocker should be fitted whenever possible to block the beam when there is no target

present. A flat surface (at least approx. 25x25 mm) made of a matte, non-reflecting material is

recommended as the beam blocker. The beam blocker must be mounted parallel to the sensor. The

yellow edge indicator LED must not light when the laser beam strikes the beam blocker.

7.4

Cleaning the front window

Fingerprints, dust and other forms of dirt on the front window can impair the function of the sensor. There

is a high risk of accidentially leaving fingerprints on the windows when mounting the sensor. Make sure

that after the mounting the front windows are cleaned! It is normally sufficient to wipe the glass pane dry

with a clean (!), soft cloth. Alcohol may be used for heavier soiling.

7.5

Checklist for correct mounting

When the SCATEC-2 is mounted correctly:



the green power LED lights as long as the electrical supply is connected



the product overlap faces in the same direction as indicated on the sensor label



the laser beam is focused on the conveying plane into a line about 2 (3)mm long



the laser line focus must be aligned in parallel to the edges to be detected



the yellow edge indicator LED does not light when the laser beam strikes the beam blocker



the yellow edge indicator LED lights as long as an edge is located in the beam



the front windows are clean

Manual SCATEC-2

Version 2021-09

www.baumer.com

Baumer Electric AG

Frauenfeld, Switzerland