Baumer HUBNER BERLIN Low Harmonics HOGS 75 Manual de instrucciones de instalación y funcionamiento - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Equipamiento industrial Baumer HUBNER BERLIN Low Harmonics HOGS 75. Baumer HUBNER BERLIN Low Harmonics HOGS 75 36 páginas. Sine encoder version with support plate for a torque arm
También para Baumer HUBNER BERLIN Low Harmonics HOGS 75: Instrucciones de montaje y funcionamiento (24 páginas), Instrucciones de montaje y funcionamiento (32 páginas), Manual de instrucciones de instalación y funcionamiento (36 páginas)

Imprimir página
Baumer HUBNER BERLIN Low Harmonics HOGS 75 Manual de instrucciones de instalación y funcionamiento
1

General notes

1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct product operation
i
Information
Recommendation for product handling
1.2
The sine encoder HOGS 75 is an opto electro nic precision measurement device which must be
handled with care by skilled personnel only.
1.3
The expected operating life of the device depends on the ball bearings, which are equipped with
a permanent lubrication.
1.4
The storage temperature range of the device is between -15 °C and +70 °C.
1.5
The operating temperature range of the device is between -20 °C and +70 °C,
restricted in potentially explosive environments, see section 2,
measured at the housing.
1.6
EU Declaration of Conformity meeting to the European Directives.
1.7
The device is UL approved (not applicable for operation in potentially explosive atmospheres).
1.8
We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.9
The encoder may be only opened as described in this instruction. Repair or mainte-
nance work that requires opening the encoder completely must be carried out by the
manufacturer. Alterations of the device are not permitted.
1.10
In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.11
Encoder components are to be disposed of according to the regulations prevailing in the re-
spective country.
i
Warning!
Damaging the seal
MB175cT1 - 11173580
on the device invalidates warranty.
Baumer_HOGS75-C-T1_II_DE-EN (16A2)
1
General notes
2