Dover Mouvex AS15 Instalación Funcionamiento y mantenimiento - Página 10

Navegue en línea o descargue pdf Instalación Funcionamiento y mantenimiento para Bomba de agua Dover Mouvex AS15. Dover Mouvex AS15 16 páginas.

Dover Mouvex AS15 Instalación Funcionamiento y mantenimiento
4. MAINTENANCE OPERATIONS (continued)
Remove clamps 7 and 9 in place and then hose boots 6.
WARNING
THE HOSE CAN BE EXPELLED VIOLENTLY.
BE SURE NO ONE IS IN FRONT OF PUMP
PORTS.
Hazardous machinery
can cause severe
personal injury
or property damage.
Operate the pump intermittently until the hose is comple-
tely out.
WARNING
DISCONNECT THE ELECTRICITY SUPPLY
BEFORE ANY MAINTENANCE OPERATION.
Dangerous voltage.
Can cause
injury and death
.
Disassemble cover 2 after removing screws 33 and was-
hers 34.
Wash the inside of the pump body and the cover with
water or a cleaning product that is compatible with the
pump materials. Also wash the wheel (front + back).
If the pump is not re-assembled immediately, dry
unpainted surfaces and coat them with the pump
lubricant in order to protect them against corrosion.
Dispose of the drained products in accordance with
the rules and regulations in force.
4.1.2 REASSEMBLING THE HOSE
If this operation has not yet been carried out, remove
cover 2, screws 33 and washers 34.
Wash the inside of the pump body and the cover with
water or a cleaning product that is compatible with the
pump materials. Also wash the wheel (front + back).
NT 1101-B00 11 13 A15 - AS15 e
NOTES
If the pump is not re-assembled immediately, dry
unpainted surfaces and coat them with the pump lubri-
cant in order to protect them against corrosion.
After a visual inspection of the inside of the body and the
wheel, lubricate all the internal parts of the casing with
pump lubricant.
Assemble the cover 2 on the pump body 1 with screws
33 and washers 34.
Moderately tighten screws so as not to crack the
transparent plate of the cover. Once the screws are
tightened, the seal must be squeezed all over.
WARNING
Do not operate
without guard
in place.
10/16
NOTE
NOTE
NEVER INSERT THE HOSE OR RUN THE
PUMP WITHOUT ITS COVER AND ITS WIN-
DOW IN PLACE.