Amphenol RJS-5ES Series Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Interruptor Amphenol RJS-5ES Series. Amphenol RJS-5ES Series 13 páginas. Unmanaged ethernet switch with 5/9 ports 10/100 mbps
Imprimir página
Ethernet
Connector
Pin-outs
Cable Distance
Ethernet
Fiber Wiring
Guidelines
Full or Half
Duplex
Operation
Unmanaged Switch User Manual
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
Downloaded from
Elcodis.com
electronic components distributor
Pin
MDI-X
MDI Port
#
Port
(typical for
uplink)
1
TX+
2
TX-
3
RX+
6
RX-
The maximum cable length for 10/100BaseT(x) is typically 100 meters (328 ft.).
From
Switch
Switch or Hub
Note: Hubs and switches are different devices. Hubs simply broadcast all messages
out all ports. switches intelligently route messages only out the appropriate port
These switches may have one or two pair of fiber ports of the type multimode or
singlemode. Multimode ports support a maximum segment length of 2 km. Singlemode
ports support a maximum segment length of 15 km, 40 km (long haul models) or even
more (contact Amphenol.)
Each fiber optic port on the switch is comprised of a pair of SC or ST connectors, which
are labeled with "RX" and "TX" on the switch. When making your fiber optic
connections, make sure that the transmit (TX) port of the switch connects to the receive
(RX) port of the other device, and the receive (RX) port of the switch connects to the
transmit (TX) port of the other device.
The ACT/LNK LED will be ON solid when you have made a proper connection.
The RJ45 ports will auto-sense for Full or Half duplex operation. No user configuration
is necessary. Each fiber optic port has a movable slide-switch or jumper that allows you
to select the mode. The metal cover needs to be removed to access the movable jumper.
See diagram below.
Note: You must cycle power to the switch after changing the slide-
switch or jumper position.
Auto-
Ethernet
MDI/
Device
MDI-X
RX+
TX/RX+
RX-
TX/RX-
TX+
RX/TX+
TX-
RX/TX-
To
Switch or Hub
PLC, Ethernet I/O, PC, etc.
Page 8 of 13
Port
RX+
RX-
TX+
TX-
Maximum Distance
100 meters (328 feet)
100 meters (328 feet)
Last Revised: 11-Jul-06