Dover DESTACO ROBOHAND DLB Series Manual de servicio - Página 3
Navegue en línea o descargue pdf Manual de servicio para Equipamiento industrial Dover DESTACO ROBOHAND DLB Series. Dover DESTACO ROBOHAND DLB Series 4 páginas.
Imprimir página
4.001-4.037RED.qxd
2/3/06
LOCKING CYLINDER -R
PLUMBING DIAGRAM
G1/8
Seal Kit
Items
For more information call us at: 1-800-ROBOHAND or 203-261-5558 Fax: 203-452-7418
Dimensions and technical information are subject to change without notice
2:17 PM
Page 37
CYLINDER VALVE
5 WAY, 3 POS
(external pilot)
Main
Supply
EXHAUST PORT
Auxiliary
Supply
LOCK VALVE
3 WAY, 2 POS
(internal pilot)
4
1
Thread
Krytox
™
Locker
Lubricant
DLB-T, A, N, R, U Series Assembled View
Linear Slides | Maintenance and Assembly Procedure
1)
Lock valve must be maintained
energized during cylinder motion,
otherwise lock is engaged and
cylinder valve shifts to mid position.
2)
Cylinder valve must be maintained
energized during extend or retract.
Also, keep energized at end of stroke
until change of direction is desired.
3)
Mid-position of 5/3 cylinder valve
may be pressurized outlets if the
combinaton of pressure load on the
cylinder and inertia effects of the
attached load do not exceed the
holding force rating of the locking
device, including allowance for wear.
4)
DO NOT use cylinder lines for any
logic functions - pressure levels vary
too much.
2
30
3
8
Lightweight
Teflon
®
Based
Machine Oil
Grease
143
DLB-T, A, n, u Series
Item Qty Name
01 1
Cylinder
02 1
Body, Internally Powered
03 2
Guide Shaft
04 2
End Block
05 1
Coupling,Externally Powered
07 4
Bushing
08 8
Shock Pad,Urethane
30 4
Dowel Pin
NOTE: Contact the Robohand Sales
Department for a complete spare parts
list with order numbers and prices.
NOTE: For accessory mounting, see
product data sheets.
7
5
Super
Bonder
Visit us on the Internet at: www.destaco.com
4.37
Third Angle
Projection