Amphenol Procom CSR-DMT Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Repetidor Amphenol Procom CSR-DMT. Amphenol Procom CSR-DMT 16 páginas. Bi-directional digitally controlled amplifier that offers an increase of signal strength in small and medium-sized rooms.
Imprimir página5.0 APPENDIX
5.1 Technical specifications
Parameter
Frequency range*
Number of independent band-segments
Band-segment center frequencies
Bandwidth
Max. gain
Full-band flatness
Manual gain adjust range
Automatic gain control
Downlink output power*
Uplink output power*
Noise figure
Input RF-range
Supply voltage
RF inputs
Local control interface
Operating temperature range
Power consumption
Enclosure
Absolute maximum RF Input
* Ask Procom A/S for other parameters. See
Procom A/S reserves the right to change the specification without notice.
Table 3. Technical specifications
CSR-DMT-380: Uplink: 380-385 MHz & Downlink: 390-395 MHz
CSR-DMT-410: Uplink: 410-415 MHz & Downlink: 420-425 MHz
Adjustable through software within
specified above frequency range with step 12.5kHz
Full band mode: 5 MHz
Selectivity mode 1: 25 kHz-1MHz with step 25 kHz
(adjustable through software)
Selectivity mode 2: 1.1-5 MHz with step 100 kHz
(adjustable through software)
hardware input attenuator 30 dB (step 1 dB)
DSP interstage attenuator for each band-segment 20 dB (step 1dB)
+19 dBm @ one carrier
+19 dBm @ one carrier
IP55 case, 300x291x103mm, mounting on wall
www.amphenolprocom.com
Specification
Uplink: 1 up to 4
Downlink: 1 up to 4
>70 dB, typ. 75 dB
±3 dB, typ. ±2 dB
50 dB totally:
>60 dB
+16 dBm @ two carriers
+13 dBm @ four carriers
+16 dBm @ two carriers
+13 dBm @ four carriers
4.0 dB
-110...-15 dBm
AC: 230V, 50Hz
N-Female, 50Ω
USB
0 ... +40 ºC
27 W (full activity)
+15 dBm
for more information.
(see figures 10, 11)
Page 15 of 16