Dover Triton 9600 Manual de conversión - Página 4

Navegue en línea o descargue pdf Manual de conversión para Equipamiento industrial Dover Triton 9600. Dover Triton 9600 4 páginas.
También para Dover Triton 9600: Procedimiento de conversión (10 páginas)

Imprimir página

9600-TO-9610 CONVERSION GUIDE

11. Place the cable clip over the DC Dispenser Power

Cable and the EJ-to-Dispenser cable. Attach the

cable clip to the back right flange on the dispenser

using the included #8-32 screw/nut.

Attach the cable clip to the lower rear

flange of the dispenser.

12. Slide the tray into the cabinet and back out again.

Make sure the cables are free to move and do not

catch on anything.

The cables should be routed through the back slide

rail as shown.

TRITON SYSTEMS, INC.

13. Load the currency cassette with currency. Affix the

proper denomination label to the cassette, as

needed. Slide the dispenser back into the cabinet.

Close and lock the cabinet door.

14. Record the ATM serial number and the date the

conversion was accomplished on the provided

adhesive label.

Unlock and open the ATM control panel and locate

the existing ATM label. Place the new label on top

of the existing label. The new label should

completely cover the old label!

Replace the existing certification label.

15. Turn the ATM power switch to the ON (I) position.

Close and lock the control panel.