Foldcraft Plymold Z000000127 Manual de instalación - Página 4
Navegue en línea o descargue pdf Manual de instalación para Mobiliario interior Foldcraft Plymold Z000000127. Foldcraft Plymold Z000000127 5 páginas. Flat benches island style
Imprimir páginaFlat Bench Island Frame
Assembly
Step 3: Assemble Seat to Frame
a. Locate Flat Bench hardware kit.
b. Posi on seat centered on island frame.
c. Insert short tongue of rear seat hook into the seat plate. Using a flathead screwdriver pry rear seat hook
un l it pops into place. (4x per Bench) Note: Booth Hooks should be inside the frame.
Screw drive shown prying
rear seat hook on contour
seat. Same method used for
flat bench.
Step 4: Installing Table Top
a. Locate the Jupiter Table & Floor Hardware Kit.
b. Place the table top on the frame.
c. Posi on table per drawings below.
d. Secure the table top from moving while fastening, using (16) #10 x 1.0" screws.
d. Now that the seat is installed, insert a self‐drilling
screw into the hole in the rear seat hook. One screw
for each rear seat hook. Do not over ghten.
Page 4 of 5
CENTER
CENTER