Amphion Amp400.8 Manual de referencia - Página 6

Navegue en línea o descargue pdf Manual de referencia para Amplificador Amphion Amp400.8. Amphion Amp400.8 10 páginas.

Back panel connections

Line level signal inputs

Balanced 3-pin XLR female line level signal in for each channel. Always use the matching input channel to

output.

Speaker outputs

The speaker terminals are equipped with Speakon terminals. For best results use a good speaker cable and

terminate them with Neutrik Speakon NL2 FX, which houses cable diameters from 6 to 10 mm. Each channel

is active when cables are inserted. Always use the matching input channel to output.

Power input

Amplifier automatically selects the correct voltage in the 100-240V range, and is internally fused. Connect

the AC line cord by orienting the IEC plug correctly, and pushing the plug firmly into the IEC receptacle. It

should seat tightly. It can only be inserted when it is properly oriented.

PLEASE NOTE! Always turn power off before inserting or removing cables.

PLEASE NOTE! Use the best possible connection to the AC power source. Avoid extension cords as they

will cause some voltage drop between the AC source and your amplifier. If the use of an extension cord is

required, ensure that it is the shortest length possible and is at least #14 AWG. Ensure that all grounding

connections are maintained. NOTE: Excessive length or inadequate gauge may result in short muting

episodes if all channels are driven to full power

430 mm / 17"