amphis 109001WW Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Ventilador amphis 109001WW. amphis 109001WW 8 páginas. 3 blade ceiling fan

L U N A – I N S T A L L A T I O N M A N U A L

M O U N T I N G B R A C K E T I N S T A L L A T I O N

NOTE Do not install mounting bracket if ceiling is leaking or damp. The ceiling must be able to

withstand the weight of at least 40kg.

Expansion Screw

Fig ure 2

Wooden Screws

Wooden Ceiling

Fig ure 3

C E I L I N G F A N I N S T A L L A T I O N

1 Loosen the two screws of the fan body. (Fig. 4)

2 Take off the plug from the down rod by removing the R pin. Slide the down rod through the

canopy and connector. Slide the fan body electrical wire through the down rod. Sit the down rod

into the fan body and rotate the down rod until the holes on the down rod align with the holes

of the fan body. Slide the plug through the holes and secure it with the R pin on the other side.

Finally, tighten the other two screws. (Fig. 5)

3 Place the down rod with hanger ball into the mounting bracket. Rotate the hanger ball (or fan

Loose Screws

Fan Body

1 Concrete Ceiling Drill two holes with an appropriate

depth using an 8mm diameter drill bit and insert one

expansion screw (not supplied) to each hole. Fix the

mounting bracket into the expansion screws, and tighten

it with the nuts of expansion screws. (Fig. 2)

2 Wooden Ceiling Fix the mounting bracket to the wooden

ceiling with four wooden screws. The thickness of wooden

ceiling must be at least 7cm. (Fig. 3)

Canopy

Connector

Plug

R Pin

Hanger

Ball

Mounting

Bracket

Card Slot

Card Point