Dovpo ROGUE 100 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Cigarrillos electrónicos Dovpo ROGUE 100. Dovpo ROGUE 100 9 páginas.

11. Replace Atomizer

When replacing an atomizer, the display will show a New/

Same interface. See following picture.

Press the "+" button to confirm that is a new atomizer,

press the "-" button to confirm it is the same atomizer

and the resistance will stay the same.

Hold both Fire Button and "-" button to lock the wattage/

temperature. The message "SYSTEM LOCKED" will appear

on screen. While wattage/temperature is locked, the

message "PRESS FIRE & DOWN TO UNLOCK" will appear

on screen when pressing "+" or "-" button, hold both

Fire Button and "-" button to unlock. You will see the

message "SYSTEM UNLOCKED" appear on screen.

No Atomizer: "CHECK ATOMIZER"

Short Circuit: "SHORTED"

Resistance is higher than 5.0Ω

Resistance is lower than 0.1Ω: "HIGH ATOMIZER"

Board Temperature is above 80℃: "OVERHEAT"

Battery Voltage is below 2.8V: "LOW BATTERY"

Keep pressing the Fire Button for over 10s: "OVER 10S"

: "

HIGH ATOMIZER"