Advanced Ex-3021 Manual - Página 11

Navegue en línea o descargue pdf Manual para Instrumentos de medida Advanced Ex-3021. Advanced Ex-3021 20 páginas. Remote status indicators

Imprimir página

2.3 Level 1 Menu Functions

The following table gives a list of the Level 1 Menu Functions and a brief description for each function.

Menu Option

Sub Menu /

Item

VIEW

FAULTS

DISABLES

WARNINGS

LOG

SW VERSIONS

LED TEST

EXIT

2.3.1

Navigating through Level 1 Menus

[Level 1 Menu]

VIEW

LED TEST

EXIT

(15 seconds in a fire alarm condition). Press the  button again to return to the menu option.

2.3.2

View

On selection, the current status of any Faults, Disablements and Warnings along with the history Log can be

shown.

[View Menu]

FAULTS

DISABLES

WARNINGS

SW VERSIONS

EXIT

[Fault Status]

Nothing to Report

2.3.2.1 Faults

[Fault Status]

1 of 3

DETECTION ZONE 1

>SHORT CIRCUIT

DETECTION ZONE 2

>OPEN CIRCUIT

www.advancedco.com

Comments / Description

View any current fault conditions recorded.

View any current disablement conditions.

View any current extinguishant warnings conditions.

View the history log.

View the software version installed in the extinguishant control panel

and in remote status indicator panels.

Disable Zone, Sounder, Input and Output circuits and disable

functions. Enable any current disablement conditions

Return to the normal status display.

Press the  button to select the Menu Options

When the menu is displayed, use the  buttons to highlight the required menu

option and then press the  button to select it.

Press the  button from within a menu option to return to the previous menu.

The display will revert to the status mode display after 60 seconds on no activity

Press the  buttons to scroll through the list and press the 

button to select the required view option.

If there are no conditions present, the display will show "Nothing to

Report".

If there are fault conditions present, the display will show the

number of conditions and a list of the fault conditions.

Press the  buttons to scroll through the list of faults.

Press the  button to return to the previous menu.