Dovre 700 Instrucciones de instalación y manual de funcionamiento - Página 6

Navegue en línea o descargue pdf Instrucciones de instalación y manual de funcionamiento para Estufa de leña Dovre 700. Dovre 700 14 páginas.

3.2.

Preparing the stove

Please inspect the stove for damage caused during transport immediately after deliv-

ery and notify your distributor in case there are any defects. Do not put the stove

into operation in the meantime.

In order to avoid damaging the stove during installation and to make handling of the

stove easier, it is recommended to remove previously all loose parts (fire-resistant

bricks, ashtray, ...) from the stove. Note the location of those parts while removing

them, so that you have no difficulties in re-assembling the parts later on.

3.2.1. Smoke outlet

Your stove is suitable for two connections: a top or a rear connection.

Upon supply, the top and rear exhausts have been left open. Depending on the posi-

tion chosen, one opening can be covered with the blanking plate supplied; the other

one can be equipped with the connection collar supplied (see picture). Use the fix-

ings supplied and be sure to tightly seal the connection collar and the blanking plate

to the stove by means of the kit or paste supplied.

700

03.27838.100