Follett 230V 50Hz Manual de instalación y mantenimiento - Página 5
Navegue en línea o descargue pdf Manual de instalación y mantenimiento para Fabricador de hielo Follett 230V 50Hz. Follett 230V 50Hz 20 páginas. 230v 50hz ice and water dispensers
Imprimir páginaPlumbing
Dispenser
Note: Drains should be hard piped and insulated. Maintain at least 6mm per
304mm run slope on drain line run
Icemaker
Clearance and access information
• 1296mm above counter
• 305mm on side opposite tower, below counter
• Counter front or rear panel must be removable for service access to both sides of dispenser and
icemaker(s), if any
• Below counter access to drain clean-out required on utility side of dispenser
• See Icemaker Installation Manual packed with icemaker(s) for clearance requirements for automatic
load dispensers
Side view
696mm
305mm
water connection
hopper drain
661mm
3/4" PVC slip joint for hopper drain
3/4" PVC pipe nipple for beverage drain pan
3/8 ID red line tubing for water in
Refer to Icemaker Installation Manual packed with icemaker for installation instructions
432mm
beverage
pan drain
480mm min
153mm min
480mm min
305mm min
Automatic load units with 1 icemaker
Automatic load units with 2 icemakers
4
Front view
305mm
553mm
1264mm
712mm
794mm