Combi Victoria 8850 Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Asiento de coche Combi Victoria 8850. Combi Victoria 8850 20 páginas. Convertible car seat

Imprimir página
Removal Of Car Seat Installed With Vehicle Seat Belt:
1
Tip belt adjuster to loosen top tether strap (fig. g).
2
Depress retainer spring
3
Position seat in recline position #1.
4
Unbuckle vehicle seat belt.
- Pressing down in center of car seat to reduce tension on vehicle seat belt will make it
easier to unbuckle vehicle seat belt.
5
Open belt lock-off and remove vehicle seat belt from belt path.
WARNING
• Keep harness straps snug and positioned on shoulders and thighs.
• Harness covers MUST be used when forward-facing.
• For proper harness fit:
- Infant insert MUST be used with small infants.
- Shoulder belts MUST be through shoulder belt slots in infant insert.
- Discontinue use of the infant insert when shoulder belts become too short to fit infant.
• Child must be dressed in clothing with arms and legs that will not interfere with buckling and snugly
adjusting harness.
• Do not use accessories or parts other than those provided by Combi USA or Strolee. Use of accessories or
parts from other manufacturers could alter the performance of the car seat.
• Never leave child unattended, even when sleeping.
• Strangulation Hazard: Child can strangle in loose harness straps. Never leave child in car seat when straps
are loose or undone.
1
Position harness to fit infant:
• Rear-facing - Shoulder harness straps must be through shoulder harness slots
at or below child's shoulders.
- Only use the middle and lowest sets of shoulder harness slots
for rear-facing
See "Changing Shoulder Harness Position" section to change
position of shoulder harness straps.
• Forward-facing - Shoulder harness straps must be at or above child's
and unhook
tether hook from vehicle top tether anchor (fig. h)
2
1
Section 10 - Securing Child In Car Seat
DEATH or SERIOUS INJURY can occur
.
(fig. a)
shoulders and harness covers MUST be used.
- Only use the middle and top sets of shoulder harness
slots for forward-facing
- Discontinue use of car seat if shoulders of child are above
top shoulder harness slots.
See "Changing Shoulder Harness Position" section to
change position of shoulder harness straps.
23
.
(fig. b)
24
Belt
Adjuster
(fig. g
2
1
Retainer
Spring
(fig. h)
Rear-facing
Middle Harness
Strap Slots
Lowest Harness
Strap Slots
(fig. a)
Forward-facing
Top Harness
Strap Slots
Middle Harness
Strap Slots
(fig. b)
Tether
Hook