Ampler Stout 2019-2021 Manual - Página 10
Navegue en línea o descargue pdf Manual para Bicicleta Ampler Stout 2019-2021. Ampler Stout 2019-2021 18 páginas.
10
Keep your bike clean
Check the tyres
Maintenance instructions
Just cleaning the bike regularly contributes a lot to a long life of your
e-bike, and you can do a few things yourself without much technical
knowledge. Here we have put together a few tips to help you enjoy
your e-bike for a long time.
The first important check-up should be done in a bicycle repair shop
after 500 kilometres. We then recommend having your Ampler e-bike
checked thoroughly in a bicycle workshop every 3,000 kilometres or at
a minimum once a year. Any bicycle repair shop can carry out such an
inspection, or you can make an appointment at our showrooms or
service partners by
contacting us.
One of the most important things is keeping your bike clean. Preven-
ting dirt to settle will help the moving parts running smoothly and
noise-free.
• If you ride through the mud, you can let your bike dry and then
brush off the dirt with a big, soft bristle brush.
• Give your bike a nice cleaning every once in a while with water and
soap — the power panel and motor housing is waterproof.
• The power panel can be cleaned with some contact spray and an
old toothbrush. Do not use anything metallic near the charging port!
• Do not use pressure washers as it will remove the "good" grease on
the bike.
• Clean your chain before oiling it.
The right tyre pressure guarantees low rolling resistance and also a
better response between the torque sensor and the motor, and has a
significant impact on preventing punctures.
In general, the indication on the sidewall of the tyre is the maximum
value, and you can still go down a little with the tyre pressure, but
never beyond.
The graph below shows a suggestion between comfort and speed. You
should check the tyre pressure before every ride or at least once a
week. We recommend buying a floor pump with a pressure gauge
which clearly shows the tyre pressure.