Follett HMC1010ABS Manual de instrucciones de instalación - Página 8
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Fabricador de hielo Follett HMC1010ABS. Follett HMC1010ABS 17 páginas. Ice storage bins
Imprimir página
Install the ice transport tube.
5.1
Ice transport tube installation
➏
➐
Ice transport tube tips
• Insulate entire length of ice transport tube
• Secure ice transport tube
runs see guide on page 14.
• Pitch ice transport tube at least 1/4" per foot (6,4mm/.3m)
• Ice transport tube must drain towards ice machine
Ice transport tube to bin
• Be sure tube ends are square
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers
before making connection to ease assembly
• Push ice transport tube onto ice machine nipple
• Install hose clamp
Ice transport tube to Ice machine
• Be sure tube ends are square
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers
before making connection to ease assembly
• Push ice transport tube onto ice machine nipple
• Install hose clamp
8
➍
➋
1/4˝ (6,4mm)
➋
as needed to prevent dips and traps from forming. For long tube
➍
➐
➑
➓
Hot Water
160 F (71 C)
➊
➌
1' (0,3m)
➊
➌
➏
➒
self-contained
Ice transport tube
➎
➑
➒
➓
BIN • RIDE Technology
5
➎
➎