Acer Veriton Z6610G Manual del usuario - Página 33

Navegue en línea o descargue pdf Manual del usuario para Escritorio Acer Veriton Z6610G. Acer Veriton Z6610G 38 páginas. Acer veriton l4610g: user guide

Imprimir página

There shall be no more than 10 call attempts to the same

number within any 30 minute period for any single manual

call initiation, and

The equipment shall go on-hook for a period of not less than

30 seconds between the end of one attempt and the

beginning of the next call attempt.

Some parameters required for compliance with Telecom's Telepermit

requirements are dependent on the equipment (PC) associated with this

device. In order to operate within the limits for compliance with Telecom's

specifications, the associated equipment shall be set to ensure that

automatic calls to different numbers are spaced such that there is not less

than 5 seconds between the end of one call attempt and the beginning

of another.

This equipment shall not be set up to make automatic calls to Telecom's

111 Emergency Service.

This device is equipped with pulse dialing while the Telecom standard is

DTMF tone dialing. There is no guarantee that Telecom lines will always

continue to support pulse dialing.

Use of pulse dialing, when this equipment is connected to the same line as

other equipment, may give rise to bell tinkle or noise and may also cause a

false answer condition. Should such problems occur, the user should NOT

contact the telecom Fault Service.

This equipment may not provide for the effective hand-over of a call to

another device connected to the same line.

Under power failure conditions this appliance may not operate. Please

ensure that a separate telephone, not dependent on local power, is

available for emergency use.

Laser compliance statement

The CD or DVD drive used with this computer is a laser product.

The CD or DVD drive's classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE

TO BEAM.

Digital audio output statement

The optical connector contains no laser or light emitting diode (LED) more than

Class I.