Follett Horizon Elite Chewblet 1410 Series Manual de instrucciones de instalación - Página 8
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Fabricador de hielo Follett Horizon Elite Chewblet 1410 Series. Follett Horizon Elite Chewblet 1410 Series 17 páginas. For drop-ins
También para Follett Horizon Elite Chewblet 1410 Series: Manual (8 páginas), Manual de instrucciones de instalación (16 páginas), Manual (8 páginas)
Imprimir página
4.2
Undercounter installation requirements
Access panel/
door on counter
DOCKING STATION
• Prior to installing the docking assembly, ensure that the drain fitting is oriented (right or left)
correctly for your installation. An optional straight drain fitting is also supplied. You may need to
remove the back panel of the docking assembly in order to re-orient or change the drain fitting.
Replace back panel prior to mounting the docking assembly.
• Position and screw docking assembly to the bottom of counter inside of access panel/door min.
of 3.25" (83 mm) from the front edge of the cross brace
• The mounting surface for the docking assembly must be solid.
Do not mount directly onto runners or channels.
• There must be no lip or edge that would hinder the ice machine from sliding in or out of the
docking station
➋
• Ice machine must be installed facing forward as shown for service accessibility
8
Top View
➊
3.25" (83 mm) min.
22.25" min.
(656 mm)
24" min.
(609 mm
➊
remote condensing
➌
No Lip
➋
➌
DROP-IN • RIDE Technology