Follett Horizon Elite Chewblet HCD1410RBS Manual de instrucciones de instalación - Página 6

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Fabricador de hielo Follett Horizon Elite Chewblet HCD1410RBS. Follett Horizon Elite Chewblet HCD1410RBS 17 páginas. For drop-ins
También para Follett Horizon Elite Chewblet HCD1410RBS: Manual (8 páginas), Manual de instrucciones de instalación (16 páginas), Manual (8 páginas)

Follett Horizon Elite Chewblet HCD1410RBS Manual de instrucciones de instalación
Prepare the dispenser.
2.1
3.1

Dispenser preparation

4"
(101,6mm)
• Determine best route for ice transport tube run. Note: 12" (304,8 mm) clearance is required.
• Drill 1 3/4" (44,5 mm) hole through either side of dispenser
• Install gasket
onto bulkhead fitting
• Attach bulkhead fitting with flat up
• Position and secure nut locking plate
• Verify installation of O-ring on stainless steel ice transport tube coupling
• Insert stainless steel ice transport tube coupling
cap
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers
before making connection to ease assembly
• Attach ice transport tube to coupling with supplied hose clamp
6
and tighten bulkhead nut
with supplied screws
into bulkhead fitting and secure with coupling
remote condensing
Dispenser preparation
Hot Water
160 F (71 C)
12"
(304,8mm)
min.
DROP-IN • RIDE Technology
3