Caraudio-Systems VL2-MBN2 Manual - Página 9

Navegue en línea o descargue pdf Manual para Accesorios para automóviles Caraudio-Systems VL2-MBN2. Caraudio-Systems VL2-MBN2 10 páginas. Video-inserter

Imprimir página

2.5.

Picture settings

After installing the sources the picture settings can be changed using a pen on the buttons of

the video interface. Press the MENU button to open settings menu on the OSD and to

switch to the next setting. UP and DOWN change the corresponding values. The buttons are

embedded in the housing to avoid accidental changes during or after installation.

2.6.

Audio insertion

This interface can only insert video into the factory infotainment. The video can be activated

to any audio mode of the factory infotainment. If an AV-source is to be connected, the

source's video out is connected to the video IN1 of the video interface and the source's

audio out to the audio insertion. Audio insertion is possible by factory audio AUX input, the

optional available AUX-In interface AUX-110 or FM-modulator. The factory audio AUX can be

coded by the dealership.

2.7.

Connecting 2 AV-sources

If two AV-sources shall be connected, connect the included audio cable to audio-switch-port

of the video interface. When switching the video interface from video-IN1 to video-IN2, the

audio will also automatically be switched.

Audio pins

1/2

3/4

5/6

Version 18.12.2013

Definition

Audio input signal R/L of source IN2

Audio input signal R/L of source IN1

Audio output signal L/R of factory audio AUX

or FM-modulator

Ground

No function

Audio-switch-

port

Audio-cable

Video-interface

VL2-MBN2