Follett Horizon Elite HCD1410R Manual de instrucciones de instalación - Página 7
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Fabricador de hielo Follett Horizon Elite HCD1410R. Follett Horizon Elite HCD1410R 13 páginas. Remote condensing
También para Follett Horizon Elite HCD1410R: Manual del usuario (17 páginas)
Imprimir página
4.1
Set low-pressure switch - if applicable
DIFFERENTIAL
ADJUSTMENT
SCREW
5.1
Install hail hood (Tecumseh units only)
Please remove the condenser enclosure
top to access the following parts:
•
Left and right brackets (not
interchangeable)
•
Hail hood
•
1/4 x 20 x 1/2 hex head screw (10)
1. Locate the left bracket (1)
and install using two supplied
screws (2).
2. Locate the right bracket (3)
and install using two supplied
screws (4).
REMOTE CONDENSING UNIT
CUT-IN
ADJUSTMENT
SCREW
1) Adjust the top LEFT screw
until the pointer is set to 10
(the di erential).
2) Adjust the top RIGHT
screw until the pointer
is set to 20 (the cut-in).
1
Pressure adjustment
EXAMPLE
Di erential
Cut In
20
-
3.0
40
30
2.0
Di erential
20
10
1.0
10
KG.
LBS.
CUT OUT IS
CUT IN
MINUS
DIFFERENTIAL
Hail hood
2
2
4
Cut Out
10
= 10
10
0
1.0
20
Cut In
40
20
60
4.0
80
5.5
100
7.0
LBS.
KG.
5
3
4
4
7