Dahua D-PFS3110-8ET1GT1GF-96 Manual de inicio rápido - Página 11
Navegue en línea o descargue pdf Manual de inicio rápido para Interruptor Dahua D-PFS3110-8ET1GT1GF-96. Dahua D-PFS3110-8ET1GT1GF-96 17 páginas. Ethernet switch (4&8-port unmanaged desktop switch)
Imprimir página
3.1 Preparation
● Select an appropriate installation method.
● Install the Switch on a solid and flat surface.
● Leave around 10 cm of open space around the Switch for heat dissipation and to ensure good
ventilation.
3.2 Desktop Mount
The Switch supports desktop mount. You can directly place it on a solid and flat desktop.
3.3 Wall Mount
Step 1
Drill two M4 screws into the wall. The distance between the screws needs to match that of
the wall-mount holes of the Switch.
● Screws do not come with the package. Purchase them as needed.
● Make sure that the distance between the screws is the same as the distance between
the wall-mount holes (the distance of the 4-port unmanaged desktop switch is 77.8
mm (3.06 inch), the distance of the 8-port unmanaged desktop switch without optical
ports is 128.4 mm (5.06 inch), and the distance of the 8-port unmanaged desktop
switch with optical ports is 120 mm (4.72 inch)).
● Leave a space of at least 4 mm between the wall and the head of the screws.
Step 2
Align the wall-mount holes on the back cover of the Switch with the screws, and hang the
Switch on the screws.
3 Installation
Figure 3-1 Wall mount
5