Dahua DH-PFS3206-4P-120 Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Interruptor Dahua DH-PFS3206-4P-120. Dahua DH-PFS3206-4P-120 19 páginas. Dual optical port 4-port poe switch
Imprimir página
3.4.2 802.1Q VLAN Config
IEEE802.1Q is a protocol with VLAN identifying information for data frame which is authenticated by
IEEE, which is also called "Tagging VLAN". It can recognize max 4096 VLAN, the current configurable
range is 1～4094.
Default VLAN ID number
When the port receives a packet without VLAN Tag, the system will add default VLAN ID of the port, and
forward the packet to a port with default VLAN ID.
VLAN ID number which is allowed to pass
It means the VLAN which is allowed to pass by this port, and the range is 1～4094. When the port sends
packet, and if the VLAN ID of this packet is the same as the default VLAN ID, then the system will
remove the VLAN Tag of the packet, and send this packet.
Step 1
Select "Device Management > 802.1Q VLAN Config", which is shown in Figure 3-14.
Step 2
Check "Enable 802.1QVLAN Config", which means it is enabled.
Step 3
Set "default VLAN ID"; under the situation of default, the default VLAN ID of port is 1.
Step 4
Set VLAN ID which is allowed to pass.
Step 5
Click "Save", and complete the config.
Figure 3-13
- 12 -