Caravaggi SP 20 Manual de uso y mantenimiento - Página 9

Navegue en línea o descargue pdf Manual de uso y mantenimiento para Amoladora Caravaggi SP 20. Caravaggi SP 20 19 páginas. Stump grinder

Before attempting any adjustment, be sure that the engine

is shut off. The key, spark plugs, battery cable are

removed. And the engine cool to touch!

Teeth should be positioned in the pockets & tightened to

100 - 110 ft/lbs. torque

Teeth should be set using a tooth gauge so all teeth will be projecting the

same amount.

Teeth should be set as follows:

STR

Caution: Never use the machine with missing teeth or badly worn teeth,

this will cause the cutter wheel to be out of balance & cause wear on

bearings & shaft.

The pockets are reversible, when turning, position them in the exact

location- this will ensure the cutter wheel remains in balance.

Teeth should be kept sharp.

Installation of Teeth

When installing teeth on the cutter wheel, be sure the teeth are all

extended to an equal length beyond the wheel. A tooth gauge is provided

for this.

After teeth are in

positioned, lock by

tightening the pocket

bolts

STR

Cutter Wheel

5/8

STR

Tooth

Tooth Gauge

Position of

all teeth