Amplified Nation Wonderland Overdrive v2 Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Amplificador para instrumentos musicales Amplified Nation Wonderland Overdrive v2. Amplified Nation Wonderland Overdrive v2 9 páginas.
Rear Panel Functions
Mains: Connects the amplifier to A/C power with included IEC power cord.
Fuse:
See Fuse Chart page
Power Switch: Turns the A/C mains power on to the amplifier.
Bias Test Points: See bias adjustment section
Speaker Output Jacks: There are 4 speaker output jacks, two 4ohm, one 8ohm and one 16ohm. You
should only use one speaker impedance at a time, or two 4ohm outputs are to be used to power two
8ohm cabinets.
**Never operate your amplifier without a connected speaker load, and be sure to match the impedance
of your cabinet with the corresponding value on the amp.
Effects Loop: The effects loop of the Wonderland Overdrive is a passive signal access point. Any ef-
fects plugged into the loop will be run in series with the preamp and power amp.
Footswitch Jack: The footswitch connects with the included 7 pin locking cable. The functions of the
Wonderland Overdrive v2 include channel switching and preamp boost.
6