Amplink PDM Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Unidad de distribución de energía Amplink PDM. Amplink PDM 12 páginas. Power distribution module
Imprimir páginaInstallation Basics
1. Install the "Amplink PDM" App on a smartphone or tablet
2. Determine a suitable location to mount the Amplink PDM near the battery
3. Connect the Amplink to the battery, red (+) wire first then the black (ground) wire
4. Open the App, wait for it to pair to the Amplink, then set the configurate (See "App Connection
Instructions")
5. The small green LED light on the Amplink means the Bluetooth signal is being broadcast. If the light
is not on, it will not connect to a mobile device. It will time out after 1 minute if the unit is not triggered
or currently connected to a Bluetooth device.
5. Connect the trigger wires and output wires using the Posi-connectors or other appropriate method
6. Activate the Amplink PDM using the appropriate trigger method
Note: Before completing a full installation of the Amplink, we recommend bench testing to ensure the
setup functions as desired.
Amplink PDM App
The app is designed to be simple and straight to the point. It is intended to be a tool for programming
and monitoring the output status only. The app has three main pages:
Outputs – shows the status of each of the 6 outputs and access to the Output Configuration page
Output Configuration – Allows for the configuration of outputs
Triggers – access each of the 3 input triggers to setup the behavior
Never interact with the app while operating a vehicle.
Page 4 of 12