Amplitec C23S Series Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Repetidor Amplitec C23S Series. Amplitec C23S Series 15 páginas. Dual band repeater
También para Amplitec C23S Series: Manual del usuario (13 páginas)

Imprimir página

e. Switching the AP manually.

setting the PA switch can only be operated in manual mode, press the Return button to the

uplink and downlink display of the system to switch the PA, then press the Up or Down button to

move the display cursor to the second line of "DL/UL Out:xx" (Figure 7), then press the Confirm

button to enter "XL PA:XX "(Figure 8,9)，Press the confirmation button to enter "Enable:ON or

OFF" ,press the up or down button to set the PA on or off and then press the confirmation button.

Press the Return button to return to the main menu interface when the setting is completed.

Figure 7

f. the setting of Uplink hibernation function

setting the hibernation function only can be operated in manual mode, press the Return button

to the UL display of the system you want to switch the hibernation function, then press the Up or

Down button to move the display cursor to the third line "UL In:xx" (Figure 10), then press the

Confirm key to enter the setting,press the Up or Down button to move the display cursor to the

second line "Status:XX" to set the hibernation function on or off (Figure 11,12), finally press the

Return button to return to the main menu interface.

Figure10

g. ATT setting

ATT setting can only be operated in manual mode, press the Return button to go to the uplink or

downlink of the system you want to set ATT (Figure 13), then press the Up or Down button to

move the cursor to "DL/UL Gain: XX dB", press the Confirm button to enter (Figure 14), then press

the Up or Down button to move the cursor to Press the up or down button to move the cursor to

"ATT: XX dB", press the confirmation button to enter "ATT Value: 00 dB", then press the up or

Figure 8

Figure11

Figure 9

Figure12